home *** CD-ROM | disk | FTP | other *** search
/ Mac Easy 2010 May / Mac Life Ubuntu.iso / casper / filesystem.squashfs / usr / src / linux-headers-2.6.28-15 / security / selinux / Kconfig next >
Encoding:
Text File  |  2008-12-24  |  6.1 KB  |  161 lines

  1. config SECURITY_SELINUX
  2.     bool "NSA SELinux Support"
  3.     depends on SECURITY_NETWORK && AUDIT && NET && INET
  4.     select NETWORK_SECMARK
  5.     default n
  6.     help
  7.       This selects NSA Security-Enhanced Linux (SELinux).
  8.       You will also need a policy configuration and a labeled filesystem.
  9.       If you are unsure how to answer this question, answer N.
  10.  
  11. config SECURITY_SELINUX_BOOTPARAM
  12.     bool "NSA SELinux boot parameter"
  13.     depends on SECURITY_SELINUX
  14.     default n
  15.     help
  16.       This option adds a kernel parameter 'selinux', which allows SELinux
  17.       to be disabled at boot.  If this option is selected, SELinux
  18.       functionality can be disabled with selinux=0 on the kernel
  19.       command line.  The purpose of this option is to allow a single
  20.       kernel image to be distributed with SELinux built in, but not
  21.       necessarily enabled.
  22.  
  23.       If you are unsure how to answer this question, answer N.
  24.  
  25. config SECURITY_SELINUX_BOOTPARAM_VALUE
  26.     int "NSA SELinux boot parameter default value"
  27.     depends on SECURITY_SELINUX_BOOTPARAM
  28.     range 0 1
  29.     default 1
  30.     help
  31.       This option sets the default value for the kernel parameter
  32.       'selinux', which allows SELinux to be disabled at boot.  If this
  33.       option is set to 0 (zero), the SELinux kernel parameter will
  34.       default to 0, disabling SELinux at bootup.  If this option is
  35.       set to 1 (one), the SELinux kernel parameter will default to 1,
  36.       enabling SELinux at bootup.
  37.  
  38.       If you are unsure how to answer this question, answer 1.
  39.  
  40. config SECURITY_SELINUX_DISABLE
  41.     bool "NSA SELinux runtime disable"
  42.     depends on SECURITY_SELINUX
  43.     default n
  44.     help
  45.       This option enables writing to a selinuxfs node 'disable', which
  46.       allows SELinux to be disabled at runtime prior to the policy load.
  47.       SELinux will then remain disabled until the next boot.
  48.       This option is similar to the selinux=0 boot parameter, but is to
  49.       support runtime disabling of SELinux, e.g. from /sbin/init, for
  50.       portability across platforms where boot parameters are difficult
  51.       to employ.
  52.  
  53.       If you are unsure how to answer this question, answer N.
  54.  
  55. config SECURITY_SELINUX_DEVELOP
  56.     bool "NSA SELinux Development Support"
  57.     depends on SECURITY_SELINUX
  58.     default y
  59.     help
  60.       This enables the development support option of NSA SELinux,
  61.       which is useful for experimenting with SELinux and developing
  62.       policies.  If unsure, say Y.  With this option enabled, the
  63.       kernel will start in permissive mode (log everything, deny nothing)
  64.       unless you specify enforcing=1 on the kernel command line.  You
  65.       can interactively toggle the kernel between enforcing mode and
  66.       permissive mode (if permitted by the policy) via /selinux/enforce.
  67.  
  68. config SECURITY_SELINUX_AVC_STATS
  69.     bool "NSA SELinux AVC Statistics"
  70.     depends on SECURITY_SELINUX
  71.     default y
  72.     help
  73.       This option collects access vector cache statistics to
  74.       /selinux/avc/cache_stats, which may be monitored via
  75.       tools such as avcstat.
  76.  
  77. config SECURITY_SELINUX_CHECKREQPROT_VALUE
  78.     int "NSA SELinux checkreqprot default value"
  79.     depends on SECURITY_SELINUX
  80.     range 0 1
  81.     default 1
  82.     help
  83.       This option sets the default value for the 'checkreqprot' flag
  84.       that determines whether SELinux checks the protection requested
  85.       by the application or the protection that will be applied by the
  86.       kernel (including any implied execute for read-implies-exec) for
  87.       mmap and mprotect calls.  If this option is set to 0 (zero),
  88.       SELinux will default to checking the protection that will be applied
  89.       by the kernel.  If this option is set to 1 (one), SELinux will
  90.       default to checking the protection requested by the application.
  91.       The checkreqprot flag may be changed from the default via the
  92.       'checkreqprot=' boot parameter.  It may also be changed at runtime
  93.       via /selinux/checkreqprot if authorized by policy.
  94.  
  95.       If you are unsure how to answer this question, answer 1.
  96.  
  97. config SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT
  98.     bool "NSA SELinux enable new secmark network controls by default"
  99.     depends on SECURITY_SELINUX
  100.     default n
  101.     help
  102.       This option determines whether the new secmark-based network
  103.       controls will be enabled by default.  If not, the old internal
  104.       per-packet controls will be enabled by default, preserving
  105.       old behavior.
  106.  
  107.       If you enable the new controls, you will need updated
  108.       SELinux userspace libraries, tools and policy.  Typically,
  109.       your distribution will provide these and enable the new controls
  110.       in the kernel they also distribute.
  111.  
  112.       Note that this option can be overridden at boot with the
  113.       selinux_compat_net parameter, and after boot via
  114.       /selinux/compat_net.  See Documentation/kernel-parameters.txt
  115.       for details on this parameter.
  116.  
  117.       If you enable the new network controls, you will likely
  118.       also require the SECMARK and CONNSECMARK targets, as
  119.       well as any conntrack helpers for protocols which you
  120.       wish to control.
  121.  
  122.       If you are unsure what to do here, select N.
  123.  
  124. config SECURITY_SELINUX_POLICYDB_VERSION_MAX
  125.     bool "NSA SELinux maximum supported policy format version"
  126.     depends on SECURITY_SELINUX
  127.     default n
  128.     help
  129.       This option enables the maximum policy format version supported
  130.       by SELinux to be set to a particular value.  This value is reported
  131.       to userspace via /selinux/policyvers and used at policy load time.
  132.       It can be adjusted downward to support legacy userland (init) that
  133.       does not correctly handle kernels that support newer policy versions.
  134.  
  135.       Examples:
  136.       For the Fedora Core 3 or 4 Linux distributions, enable this option
  137.       and set the value via the next option. For Fedora Core 5 and later,
  138.       do not enable this option.
  139.  
  140.       If you are unsure how to answer this question, answer N.
  141.  
  142. config SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE
  143.     int "NSA SELinux maximum supported policy format version value"
  144.     depends on SECURITY_SELINUX_POLICYDB_VERSION_MAX
  145.     range 15 23
  146.     default 19
  147.     help
  148.       This option sets the value for the maximum policy format version
  149.       supported by SELinux.
  150.  
  151.       Examples:
  152.       For Fedora Core 3, use 18.
  153.       For Fedora Core 4, use 19.
  154.  
  155.       If you are unsure how to answer this question, look for the
  156.       policy format version supported by your policy toolchain, by
  157.       running 'checkpolicy -V'. Or look at what policy you have
  158.       installed under /etc/selinux/$SELINUXTYPE/policy, where
  159.       SELINUXTYPE is defined in your /etc/selinux/config.
  160.  
  161.